Skip to main content

Data Center power density on the basic is the quantity of kW in terms of server BTU you are stacking in rack areas, and how much cooling it takes in the square footage they utilize.

There is a direct relationship between cost to build and density. The more power and cooling packed into a specific area, the higher the cost to build. However, the more efficiently you move hot air out and return it to cold air such as in higher density installations, the better your PUE is, and the lower your Operational Expenses (E) will be at your facility.

There are many different ways to address density.

Lower Density Data Center

  • Spread computer loads around data center floor at lower density to evenly support those loads without containment
  • Low cost method, can be achieved with floor air handler units, Air cooled systems, general ducting below floor or above drop down cooling.
  • Higher PUE, higher operational cost per kW used

data-center-density

Mid-Level Density Data Center

  • Set up cold and hot aisles to isolate the temperatures and airflow
    • Semi isolation via rows only
    • Aisle Containment options to completely isolate the hot and cold air
  • Brings more cooling to servers, pulls hot air away more efficiently.
  • Ability to direct more air into a smaller space to increase density of servers in one location
  • Mid-level PUE, moderate operational cost per kW used

data-center-power-density

Higher Density Data Center

  • Chimney racks to remove the hot air and return it to cooling system
  • Local in rack system with containment allows for direct local cooling
  • Total Rack containment Systems, hvac local in rack with local air exchange
  • Lower PUE, lower operational cost per kW used

Our team can provide concept cooling designs, cost estimates, and site surveys for all sized projects.

Contact your FGCC representative to discuss cooling density options for your facility.

Related Projects

Our Experienced Project Managers are focused on the quality and completion of your project.

Completed

Harrahs Gulf Coast Hotel & Casino

View Case Study

Completed

Data Center HVAC | Silicon Valley

View Case Study
  • FGC Construction installed an entire megawatt of UPS and generator upgrade to our 3d Printing facility. This holds our power stable and provides unlimited runtime. Much appreciated!

    Lee M.COO - Boston, MA
  • FGC Construction delivered 2.5MW of high density data center in the middle of Silicon Valley. City planning to utility negotiations. Very impressed!

    Tim S.CFO - Silicon Valley, CA

Data Center Management: 5 Proven & Effective Tactics

Read More

What is PUE: Power Usage Effectiveness

Read More

What is Data Center Commissioning?

Read More

Start a Project

We want to work with you.

Contact Us

Our experts are ready to talk.

(855) 240-6776 Click Here for a Quote.